CalExotics - Onyxxx Rechargeable Rider Probe Vibrator (Black)

The Onyxxx® Rechargeable Rider Probe is a curved silicone vibrator built around three positioning options: handheld use, hands-free mounting on a smooth surface, and compatibility with a suitable O-ring harness. Its lightly bulbous tip follows a smooth, untextured shaft, while the broad suction-cup base provides a stable external platform. Ten vibration speeds allow the single motor to be adjusted from a lower starting level without adding complex pattern controls.

The black probe is IPX7 submersible and USB rechargeable. A full charge takes approximately 2.5 hours, providing about 45 minutes on high or up to 90 minutes on low. Memory returns to the last-used speed and a three-second travel lock helps prevent accidental activation.

Key Benefits

• A curved shaft and lightly bulbous tip create a defined internal contact profile.
• Ten vibration speeds offer incremental intensity adjustment rather than a mixed pattern menu.
• The suction-cup base supports hands-free use on a clean, smooth and non-porous surface.
• Harness compatibility allows the same probe to be used with a correctly sized O-ring system.
• Memory and a three-second travel lock support convenient return use and transport.
• IPX7 silicone construction combines submersible cleaning with up to 90 minutes of low-speed runtime.

1. Charge for approximately 2.5 hours, disconnect the cable and confirm that the charging area is dry.
2. Clean the probe and apply water-based lubricant generously to the silicone shaft and intended area.
3. For handheld use, insert gradually and adjust the curve towards the preferred contact area without forcing depth.
4. For hands-free use, press the clean suction cup firmly onto a smooth, dry, non-porous surface and test its hold before applying body weight; for harness use, verify O-ring fit and stability first.
5. Begin at the lowest vibration speed and increase gradually. For anal use, keep the entire suction-cup base outside the body.
6. Switch off, release suction from the cup edge rather than pulling the shaft, then wash and dry the probe.

• Wash before and after use with warm water and mild soap or a silicone-compatible intimate-product cleaner.
• The IPX7 probe may be submerged, but the charging connection must be completely dry before charging.
• Use water-based lubricant with the silicone shaft.
• Clean the underside of the suction cup carefully so oils or residue do not weaken its seal.
• Dry fully, engage the travel lock and store separately without folding or weighting the suction base.

Can the Rider Probe be used hands-free?
Yes. Its suction-cup base can mount to a suitable smooth, non-porous surface after the hold has been tested.

Is it harness compatible?
Yes. The external base is designed for use with a compatible O-ring harness; check the harness fit before use.

Does it use patterns or speeds?
CalExotics launch information describes ten vibration speeds, providing stepped intensity control.

Can the Rider Probe be used for anal play?
Yes. Its broad suction-cup base remains outside the body as a flared safety base; use generous water-based lubricant and insert the curved shaft gradually.